News Center
News
14
2023
-
08
Common Fixture Introduction
People in the machinery industry, especially those who do machining, have to be very familiar with all kinds of fixtures, so I'll tell you about our commonly used ten fixtures first!! At the very least, you should know and use it when you see it in the future!!
People in the machinery industry, especially those who do machining, have to be very familiar with all kinds of fixtures, so I'll tell you about our commonly used ten fixtures first!! At the very least, you should know and use it when you see it in the future!!
10th place: dividing head
What used to be so beautiful is now in decline. It's all the fault of the indexing spindle. So please settle for tenth.
Ninth place: pneumatic cylinder fixture
The essence of automatic clamping fixture. Many workers in the fixture should be the most like pneumatic fixture.
Eighth place: Spring jacket
How can a variety of tools solve the clamping problem with fewer knives? You can find the answer here.
7th place: Magnetic platform
How can you more easily put the parts without clamping position on the workbench for your processing? See how he does it?
Sixth:
The spindle and handle are the crystallization of human wisdom and cutting-edge technology.
Fifth place: vise; and his brother, Maisi
Workpieces that cannot be pressed by the pressure plate should be clamped with vise/wheat.
Fourth place: EROWA Fixture
It can guarantee repeatable positioning accuracy of/-0.002mm. The electrode can't do without it; Four-axis machining can't do without it; Five-axis machining can't do without it.
Third place: combination of T-block, screw, pressure plate and nut
No matter how good your other fixtures are, it is difficult for you to install them on the machine tool (for milling machines and machining centers) without the combination of T-blocks, screws, pressure plates and nuts. If you don't believe me, try it.
Second place: T-type workbench
Don't look at him at ordinary times, if another day you find that your machine tool does not have a T-type workbench, you will be at a loss.
First place: Chuck
Hundred years old fixture is still busy in the mechanical workshop. Its classic degree is self-evident. There are more chucks than lathes in the workshop. If there is no chuck, the lathe cannot operate.
RELATED INFORMATION
2023-08-14